Society & Culture & Entertainment Performing Arts

7 Steps to Erect Portable Stages

Gaining acceptance rapidly, portable stages are extensively used by theatre groups and related organizations.
These stages are available in various styles, right from the polished and sumptuous ones to the smaller yet graceful ones, the list is infinite.
However, when we talk about a theatre group, it is impractical to spend a mammoth amount on stages.
Therefore, an alternative to the same is building your own portable stage.
Further, this may prove to be extremely beneficial as the stage can be designed to suit all the requirements of the organisation.
Following are a few steps that will help you and design and erect your own stage: Step 1: The first step here is to construct a stage platform.
It is advisable that you use a ¾ inch plywood for the top and a 1/6 lumber instead of 2/4 for the frame.
This will be helpful as the weight would reduce considerably.
Step 2: The next step is to cut 12 legs using a 1/3 lumber and then gluing two legs together as one.
You are required to glue the legs together so as to obtain a thicker yet lighter leg.
Step 3: The third step calls for turning the frame upside down and clamping the legs on it in six locations: two centres and four corners.
Now drill two 3/8 inch holes in each leg and frame.
Step 4: Next, insert a carriage bolt through each hole.
Remove the clamps and turn the platform right side up.
Step 5: The fifth step is to make cross bracing from 1/3 boards and attaching them to the legs using strong spring clamps.
Step 6: After assembling the set on stage, label the platform from right to left in a numerical order.
This will simplify the process of packing and unpacking them.
Step 7: This step calls for assigning two stagehands to each platform.
and train them about the assembly of the stage.
Also, practice timed assembly and disassembly.
Further ensure that you use clamps to fix several platforms together for an enhanced stability.

Leave a reply