Pets & Animal Pets & Animal

How to Build a Simple Goat Pen for 4H

    • 1). Use the post driver to drive one of the 6-foot steel posts into the ground to a depth of 1 1/2 feet.

    • 2). Measure 16 feet from the first post using the tape measure and drive another 6-foot post 1 1/2 feet deep.

    • 3). Repeat this process for the remaining posts.

    • 4). Lift and place one of the stock panels against the first and second posts that were driven.

    • 5). Cut two 4-inch pieces of baling wire and secure the panel to the post by securely twisting it around the panel and post at the top and the bottom.

    • 6). Repeat this same procedure for the rest of the panels until you come to the last post.

    • 7). Connect one of the two-sided snaps at the top of the final post and one at the bottom.

    • 8). Move the last panel into place and connect it with the snaps.

Leave a reply